Steve Hawkins
Tue, 29 Nov 2022 22:30:52 +0000
2022
Thread size 8
Hi Ryan, The resistor is adjacent to the BPCM on the shortest pigtail. Easy to see when your pack is open. You will also need TIS2000 software on a XP machine in addition to the tech2 to complete pass-through programing. Steve From: Ryan Dela [mailto:[email removed]] Sent: Tue...
Ryan Dela
Tue, 29 Nov 2022 13:36:58 -0800
2022
Thread size 8
Thank you for the information Steve. I will scour the manual to look for where I can find this resistor in the vehicle. I have avoided using the Tech 2 to make changes, it sounds like I will have to get more comfortable to get this converted back. The modifications to the batt...
Steve Hawkins
Mon, 21 Nov 2022 16:13:01 +0000
2022
Thread size 8
Hi Ryan, I am not sure of everything that Jeff did in his conversations (I have one of his packs in a truck but have not opened it up yet). Nevertheless, I generally believe you would only need to reprogram the BPCM to the PbA calibration. You would have two choices of PbA cal...
JayBeckerman
Fri, 18 Nov 2022 20:34:45 -0500
2022
Thread size 8
Hi S10 guys, I was researching riding electric laws tractors a few days ago when I ran across this information in the comments section of the Home Depot web page description of a Ryobi 30-inch electric riding mower.? I had not heard of the desulfation process before, and thoug...
Ryan Dela
Thu, 17 Nov 2022 20:12:05 -0600
2022
Thread size 8
It sounds crazy but way back in 2005 I had Jeff at EV Bones convert my 1997 lead acid S10 to nimh... I am curious if anyone knows how to convert it back to the lead acid program? It was awesome in 2005 and I am thankful that I did it. I am designing a lithium ion battery pack...
Brad Riggle
Wed, 8 Jun 2022 20:04:51 -0600
2022
Thread size 8
Hello Everyone, I have a 97 EV S-10 that was driven to the place it was parked when I bought it. Has not been ran in over 10 years. Someone sat on the half tonneau cover can cracked it Batteries are bad. The only work that has been done to the truck is that I opened the box an...
Larry Paul
Wed, 8 Jun 2022 11:27:10 -0700
2022
Thread size 8
What have you done to the Honda to make it a project? > On Jun 8, 2022, at 11:25 AM, themacman118--- via S10-EV <[email removed]> wrote: > > ?Hello everyone, > > I?m finally ready to take on a new EV project, hoping someone might be able to help me get one? > > Have been eyein...
List member
Wed, 8 Jun 2022 09:44:52 -0600
2022
Thread size 8
Hello everyone, I?m finally ready to take on a new EV project, hoping someone might be able to help me get one? Have been eyeing the S10 EV for quite a few years now, and think it would be a great match to my 2001 Honda Insight project (picture attached). Open to any condition...
Ryan Fralish
Tue, 4 Jan 2022 17:46:50 +0000 (UTC)
2022
Thread size 4
Happy New Year! My Magne Charger has the same type of damage since the previous owner. I would like to repair it.I didn't recognize the charred part as diodes and was guessing it might be some type of mechanical contact that failed.How can the replacement part number be identi...
José Antonio Movarec
Mon, 08 Nov 2021 23:58:08 -0000
2021
Thread size 4
? Hello to everyone, If there is available on any of your homes a Gen 2 Magne Charger that you are willing to sell, it would be great, as today a power surge from the power company at home, made the one I am using explode and some other home appliances as well........ I opened...
Jerry Pohorsky
Tue, 9 Nov 2021 15:42:02 -0800
2021
Thread size 4
Hi Jose, I have 2 of these Gen 2 MagneChargers that are both in working condition. I live in Santa Clara, CA. I would be willing to sell one or both of them for a reasonable price plus shipping if you are not in my local area. I also have one of the plastic adapters that fit i...
Jamovarec
Tue, 9 Nov 2021 20:34:43 -0300
2021
Thread size 4
Hello to everyone, If there is available on any of your homes a Gen 2 Magne Charger that you are willing to sell, it would be great, as today a power surge from the power company at home, made the one I am using explode and some other home appliances as well........ I opened t...
José Antonio Movarec
Mon, 8 Nov 2021 21:27:17 +0000 (UTC)
2021
Thread size 1
Hello Everyone!, hope you are all doing fine, Following Steve?s suggestion on the Kemet Capacitors, I bought a set, they look fine, will be installing them in the near future on the truck Here a couple of pics comparing them to the original Marcon. Regards? Jose Movarec -----...
Ryan Dela
Sun, 13 Jun 2021 10:32:59 -0700
2021
Thread size 2
Hey Richard, I live in Portland and if you don't find him could use a backup charger. It is always good to catch up with fellow (even former) S10e owners. I am out in Hillsboro. Ryan Dela On Fri, Jun 11, 2021, 3:57 PM Richard Wilson <[email removed]> wrote: > Greetings all, >...
Richard Wilson
Fri, 11 Jun 2021 15:56:45 -0700
2021
Thread size 2
Greetings all, Former S10 owner who sold to a gentleman in Portland years ago who's name escapes me. I had promised to get the Magne charger to him which I failed to do. If you're out there, please claim your charger! If not or if he's not interested I would like to find a hom...
Jamovarec
Fri, 7 May 2021 23:52:41 -0400
2021
Thread size 6
? ? Hi Steve and everyone! Regarding your question about the Nichicon capacitors I found in 2015, they are identical to the Cornell Dubillier originals, and they have worked fine since I installed them back then. As a precaution they should be changed to avoid failure or explo...
Steve Hawkins
Tue, 4 May 2021 19:28:18 +0000
2021
Thread size 6
Hi Kevin, et al, If I understand it correctly, non-EE here, it was originally considered mostly an NIMH issue because the higher voltage of the NIMH pack was closer to the max. rating of the caps, 450vdc. However, and I believe this is correct, as the years go by and the caps...
List member
Tue, 4 May 2021 18:24:13 +0000 (UTC)
2021
Thread size 6
Years ago, when I first heard this, I was freaking out over the possibility that my Capacitors would turn my truck into a parts donor. As I scrambled to find the replacements, I was told that it was an issue only on the Nickel Metal Hydride battery trucks and not the Lead-acid...
List member
Sun, 25 Apr 2021 15:47:50 +0000 (UTC)
2021
Thread size 7
First of all, I'm not an electronics specialist but I do understand the basics. Just take what I'm saying as a suggestion.? I've sold my 1997 S10E but I did own it and keep it on the road for over 10 years. To your question,I would be concerned if there was NOT an ohm reading...
Eric Jonathan
Sat, 17 Apr 2021 13:27:21 +0000 (UTC)
2021
Thread size 1
Hello All,? ? I've got two 97 s10e s looking for a new home.? ?#1 is complete, less batteries, 40k miles, very strong runner, includes a tech 2, gen 2 large paddle charger,? manuals, and a spare right fender , that has a? dent.? Everything worked at time of battery removal lat...
Kevin Kayden
Wed, 3 Feb 2021 14:10:33 +0000
2021
Thread size 1
Hello to all the remaining S10-EV fans, I wish I could help with this project. However, if anybody is interested in the EVs "back in the day," that is a great website to find out. I always was interested in the Chrysler T-Van, with the Ni-Fe batteries. Good luck to Steve with...
Kevin Kayden
Mon, 17 Aug 2020 12:47:11 +0000
2020
Thread size 1
That must be a regular S10 converted. The only factory S10-EVs produced were in 1997 and 1998. There was also, from the factory, a neat little "ELECTRIC" emblem on the doors, and maybe the tailgate too IIRC. There were several people from years ago, Don in Oregon and Kevin in...
Ken Price
Sat, 15 Aug 2020 23:29:10 -0700
2020
Thread size 1
I have a 94 I’ll make a smoking good deal on. Needs batts or lithium conversion, low miles clean On Aug 15, 2020, 10:46 PM -0700, [email removed], wrote: > > S10 -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://pairlist5.pair.net/mailman...
Steve Roe
Mon, 15 Jun 2020 11:21:04 -0700
2020
Thread size 1
Hi everyone, I am considering a S10 EV truck for sale nearby that has dead batteries and was sitting for ten years in a carport. Couple questions: 1. Are NiMH batteries still available from Ovonic? If so how much are we talking and we’re do you recycle the old ones safely for...
Steve Hawkins
Thu, 20 Sep 2018 02:30:06 +0000
2018
Thread size 10
Michael, Had not received it, thanks for resending. All good data. Steve From: Michael Anzalone [mailto:[email removed]] Sent: Monday, September 17, 2018 8:05 PM To: [email removed]; [email removed] Cc: Steve Hawkins; Alan Martin Subject: Re: [S10-EV] HTCM Guys, I'm having ema...
Michael Anzalone
Mon, 17 Sep 2018 22:04:36 -0400
2018
Thread size 10
Guys, I'm having email issues, so I apologize if you have already received this: I know I'm late the the party, but my 1998 had a bad HTCM when I bought it. The truck had a water leak, and I found the HTCM sitting in a puddle under the driver's seat. I paid $971 for a replacem...
List member
Thu, 19 Jul 2018 22:53:58 -0400
2018
Thread size 10
My 1997 Lead acid truck going to LiFePO4 1GCDE14H7V8188985 Kevin McMullin Bear Delaware 19701 In a message dated 7/19/2018 10:27:00 AM Eastern Standard Time, [email removed] writes: Al, Good tracking. Add these, I have had two '98s: 1gcde14h6w8120257 - was destroyed and parted...
Steve Hawkins
Thu, 19 Jul 2018 14:26:55 +0000
2018
Thread size 10
Al, Good tracking. Add these, I have had two '98s: 1gcde14h6w8120257 - was destroyed and parted out. 1gcde14h4w8108995 - currently own. Steve === -----Original Message----- From: Alan Martin [mailto:[email removed]] Sent: Wednesday, July 18, 2018 10:35 AM To: Steve Hawkins Cc:...
Alan Martin
Wed, 18 Jul 2018 12:34:30 -0400
2018
Thread size 10
I've been casually tracking trucks as they appear on ebay or the list for public sale for a few years now. I've got 7 VIN's for MY98 so far, one is mine. If anyone else has info I'd be glad to compare notes. 1GCDE14H0W8117631 1GCDE14H2W8180665 1GCDE14H6W8134126 1GCDE14H7W81619...
Steve Hawkins
Wed, 18 Jul 2018 15:48:57 +0000
2018
Thread size 10
Good catch, Don, Kevin, my unit was from a ’98. And, BTW, I understand there are 75+ ‘97s free range and only 12 or so ’98s. If anyone has better numbers I would be interested in knowing them. Steve From: Don Blazer [mailto:[email removed]] Sent: Tuesday, July 17, 2018 7:20 PM...